TENDO Platinum
Hydraulische expansie-gereedschapshouder
TENDO "The original" is de hydraulische expansie-gereedschapshouder van SCHUNK. Dankzij het uitgebreide assortiment van 29 interfaces is de TENDO gereedschapshouder de nauwkeurige allrounder die geschikt is voor gebruik met alle standaard gereedschapswerktuigspindels. Met gestandaardiseerde buitencontour volgens DIN 69882-7.
Beschrijving
Advantages – Your benefits
- High level of flexibility
Clamping of different diameters, flexible by means of direct clamping Ø 6 – Ø 32, or the combined use of slotted or coolant-proof intermediate sleeves - Micron-precise tool change within seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices - Excellent vibration damping
Micro-blowouts are prevented, optimal workpiece surfaces, machine spindle protection, increased tool service life resulting in a reduction of costs - All commercially available tool shank types can be clamped
Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB Form B: with lateral pulling faces, shank form B in accordance with DIN 1835 Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE - Fine-balanced by default
Suitable for high speeds with a balancing grade of G2.5 at 25,000 RPM - Permanent run-out and repeat accuracy < 0.003 mm
Even cutting action, increased tool service life, and reduced costs for regrinding or buying new tools - Exact length preadjustment
Length adjustment in the range of 0.01 mm accuracy, with adjustment travel of 10 mm - Comprehensive compatibility
Can be ideally combined with TRIBOS SVL tool extensions - Dirt grooves for reliable torque transmission
Dry clamping surfaces, by displacement of oil, grease or lubricant residues into the dirt groove
Options and special information
- Flexible clamping areas due to the use of intermediate sleeves
Intermediate sleeves allow clamping of various shank diameters from 3 - 32 mm with just one toolholder. Your advantage: Reduction of the acquisition costs, higher clamping force at the given shank diameter.