The pneumatically actuated modular system WDP-5X enables user-friendly set-up of large components. The modules are clamped via spring force and can be opened simultaneously with compressed air. Depending on customer's request, the pneumatic modules can be replaced by manual modules in order to enable manual actuation. The basic modules serve as a basis for every clamping solution. They establish a rigid connection to all conventional machine tables. Using the stacking modules, the individual clamping heights can then be achieved. The form-fit connection to the workpiece is finally implemented using clamping modules in combination with clamping pins, compensation pins or clamping pin increases.
Our performance promise. Your benefits.
Clamping of freely molded parts
Clamping without interfering contour
Versatile in use
Integrated air feed-through to the clamping module
Spannmodule bzw. Ausgleichsmodule als Schnittstelle zum Werkstück. Die Spannmodule können pneumatisch oder manuell betätigt werden. Die Ausgleichsmodule dienen zum Ausgleich von feinen Höhenunterschieden.
