arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
TRIBOS-M HJND 50 Ø4x38 Abbildung ähnlich

TRIBOS-M HJND 50 Ø4x38

Polygonspannfutter

Ident.-Nr. 1355530

Auf Anfrage erhältlich
Jetzt anfragen
Dieses Produkt kann online nur angefragt werden.
TRIBOS-M HJND 50 Ø4x38, Werkzeughalter
  • Polygonspannfutter
  • Baureihe: TRIBOS-Mini
  • Werkzeughalterschnittstelle: HJND 50
  • Spanndurchmesser: 4 mm
  • Auskraglänge: 38 mm
  • Rundlaufgenauigkeit: ≤ 0,01 mm bei 4 x D
  • Wuchtgüte: Restunwucht 2 gmm/kg
  • Min. Drehmoment: 2 Nm
Technology Polygonal toolholders
Series TRIBOS-Mini
Toolholder interface HJND 50
Clamping diameter D1 4 mm
D2 [mm] 9.0
D3 [mm] 14.5
D4 [mm] 18.0
D5 [mm] 23.0
L [mm] 57.5
Projecting length L1 [mm]/[inch] 38 mm / 1.5"
L4 [mm] 22.5
L5 [mm] 27.5
L6 [mm] 30.0
G M8
Min. torque [Nm] 2.0
Wrench size A/F 13.0
Max. tightening torque [Nm] 8.0

Version
The following reduction insert is a suitable alternative for lateral joining: TRIBOS-S SRE SO 9 (0206080)

Run-out accuracy
≤ 0.01 mm of 4 x D

Balancing grade
Residual imbalance 2 gmm/kg

Tool shank quality
h6

Length-setting screw
Without adjustment screw for axial length adjustment
The minimum clamping depth is 17.5 mm
The maximum clamping depth is 35 mm

Individual
Additional sizes and customized designs are available upon request