KSH3 140-Z-PM
Hydraulische 2-Backen-Kraftspannblöcke
Ident.-Nr. 1463183
Hydraulischer Kraftspannblock Standard
Produktmerkmale:
Produktmerkmale:
- 2-Backen-Kraftspannblock
- Zentrisch spannend
- Standard Hub
- Koordinatengefertigte Absteckbohrungen
- Pneumatische Endlagenkontrolle
- Pneumatische Anlagekontrolle
- Grundbacken: Spitzverzahnung und Kreuzversatz
- Abmessungen: 140 x 140 x 77,7 mm
- Spannkraft bei max. Betriebsdruck: 30 kN
- Hub pro Backe: 3 mm
- Max. Backenhöhe: 60 mm
- Wiederholgenauigkeit: 0.01 mm
- Betriebsdruck: 10 - 60 bar
- Übersetzungsvolumen pro Doppelhub: 70 cm³
- Schließ-/Öffnungszeit: 1 s
- Gewicht: 9.1 kg
Technische Details
Stroke per jaw [mm] | 3.0 |
---|---|
Closing/opening time [s] | 1.0 |
Weight [kg] | 9.1 |
Min. operating pressure [bar] | 10.0 |
Distance H [mm] | 20.0 |
Repeat accuracy of vise [mm] | 0.01 |
Clamping force at max. operating pressure [kN] | 30.0 |
Max. operating pressure [bar] | 60.0 |
Max. jaw height [mm] | 60.0 |
Oil consumption per double stroke [cm³] | 70.0 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the chuck jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213).