AGE-Z 2-063-2
ID 324467
可替代的升级版产品：
- Z 向补偿: 8 mm
- 工件重量: 9 kg
- 力 Fz max.: 350 N
- 力 Fd 最大: 1000 N
- 最大弹簧力: 100 N
技术细节
| Z 向补偿 [mm] | 8.0 |
|---|---|
| 建议搬运重量，垂直 [kg] | 9.0 |
| 6 bar 时缩回的锁定力 [N] | 750.0 |
| 6 bar 时伸出的锁定力 [N] | 900.0 |
| 最小弹簧力 [N] | 60.0 |
| 最大弹簧力 [N] | 100.0 |
| 最小工作压力 [bar] | 2.5 |
| 最大工作压力 [bar] | 6.0 |
| 重复精度 [mm] | 0.02 |
| 机械人侧连接 | ISO 9409-1-63-4-M6 |
| 重量 [kg] | 0.8 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 60.0 |
| 长度 X [mm] | 80.0 |
| 宽度 Y [mm] | 80.0 |
| 高度 Z [mm] | 59.5 |
| 力矩 Mx max. [Nm] | 20.0 |
| 力矩 My max. [Nm] | 20.0 |
| 力矩 Mz max. [Nm] | 50.0 |
| 力 Fz max. [N] | 350.0 |
| 最大力 Fd [N] | 1000.0 |
尺寸和最大载荷
负荷图
挠曲
尺寸和最大载荷
这是可影响补偿装置的所有力矩和负载之和的最大值（加速力和扭矩、过程力等），以确保功能不出差错。
负荷图
挠曲
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Guidance system
Scope-free ball bearings
Monitoring
via magnetic switch or inductive proximity sensor
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
hard anodized aluminum alloy, functional parts made of hardened steel
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months