arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
更改地区选项,查看您所在区域可供应的产品、服务和联系人的相关信息。
SRH-plus-D 60-W-M8-AS 图片仅供参考

SRH-plus-D 60-W-M8-AS

ID 1407409

通用旋转头 SRH-plus-D, 尺寸: 60, 气动, 减振器型式: 软, 旋转角度: 180 °, 端位置调整: 3 °, 终端终点位置阻尼: 弹簧弹性体, 带集成电路通道

  • 流体通路数量: 8
  • 输出端电气接口尺寸: M8/M12
  • 扭矩: 69.9 Nm
Max. operating pressure [bar] 8.0
Swivel time without a payload [s] 1.3
Weight [kg] 21.2
Nominal operating pressure [bar] 6.0
IP protection class 67
Min. ambient temperature [°C] 5.0
Max. ambient temperature [°C] 60.0
Repeat accuracy [°] 0.05
Min. operating pressure [bar] 3.0
Max. axial force Fz max. [N] 800.0
Max. current [A] 1.0
Height Z [mm] 268.8
Width Y [mm] 268.8
Length X [mm] 174.0
Torque [Nm] 69.9
Angle of rotation [°] 180
End position adjustability [°] 3
No. of fluid feed-throughs 8.0
Fluid consumption (2x nom. angle) [cm³] 1120.0
Diameter of connecting hose 6 x 3.9 x 1.05
Max. pressure fluid feed-through [bar] 8.0
Max. voltage [V] 24.0
Max. current per wire [A] 1.0
No. of E-fittings on the output end 9.0
Size of the E-connections on the output end M8/M12
Moment Mx max. [Nm] 340.0
All units are also available in an FKM version. Please contact us for details.

General notes about the series

Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.

Customized angle of rotation
More swivel angles are available on request.

Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.

Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.

Standard conditions
The technical data shown refers to an environment of 20 °C and atmospheric pressure.

Housing material
Aluminum alloy, anodized

Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].

Operating principle
Double piston rack and pinion principle

Scope of delivery
Centering sleeves, O-rings for direct connection, assembly and operating manual with manufacturer’s declaration

Warranty
24 months

Service life characteristics
on request