EGK 25-EI-N-B
ID 1491755
- Hub pro Backe: 26.5 mm
- Min. Greifkraft: 20 N
- Max. Greifkraft: 50 N
- Spannungsversorgung: 24 V
- Max. Umgebungstemperatur: 55 °C
Technische Details
| Hub pro Backe [mm] | 26.5 |
|---|---|
| Min. Greifkraft [N] | 20.0 |
| Max. Greifkraft [N] | 50.0 |
| Max. zulässige Fingerlänge [mm] | 70.0 |
| Max. zulässige Masse pro Finger [kg] | 0.13 |
| Positioniergenauigkeit [mm] | ± 0.1 |
| Wiederholgenauigkeit (Greifen) [mm] | 0.03 |
| Wiederholgenauigkeit (Positionieren, unidirektional) [mm] | 0.1 |
| Wiederholgenauigkeit (Positionieren, bidirektional) [mm] | 0.15 |
| Schließzeit [s] | 0.37 |
| Öffnungszeit [s] | 0.37 |
| Max. Geschwindigkeit (Positionieren) [mm/s] | 120.0 |
| Max. Beschleunigung [mm/s²] | 1300.0 |
| Eigenmasse [kg] | 0.58 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 55.0 |
| Schutzart IP Elektronik | 67 |
| Schutzart IP Führung/Grundbacken | 20 |
| Reinraumklasse ISO 14644-1:2015 | 5 |
| Länge X [mm] | 83.0 |
| Breite Y [mm] | 62.0 |
| Höhe Z [mm] | 78.0 |
| Nennspannung [V] | 24.0 |
| Kommunikationsschnittstelle | EtherNet/IP |
| Stromaufnahme Leistung Nenn. [A] | 0.23 |
| Stromaufnahme Leistung Max. [A] | 0.54 |
| Stromaufnahme Logik Nenn. [A] | 0.16 |
| Stromaufnahme Logik Max. [A] | 0.2 |
| Moment Mx max. [Nm] | 2.5 |
| Moment My max. [Nm] | 2.0 |
| Moment Mz max. [Nm] | 2.0 |
| Max. Kraft axial Fz max. [N] | 200.0 |
| Version ohne Greifkrafterhaltung | ja |
Dimensioni e carichi massimi
Sporgenza max. consentita
Greifmodi
Forza di presa
Sporgenza max. consentita
Dimensioni e carichi massimi
Le coppie e le forze indicate sono valori statici, valgono per ciascuna ganascia base e possono subentrare contemporaneamente. I carichi possono aggiungersi alla coppia generata dalla stessa forza di presa.
Sporgenza max. consentita
Greifmodi
- X-Achse:
- Verfahrzeit
- Y-Achse:
- Greifkraft
Forza di presa
- X-Achse:
- Lunghezza delle dita
- Y-Achse:
- Forza di presa
Sporgenza max. consentita
Lmaxcorrisponde alla lunghezza massima consentita delle griffe, vedi la tabella dati tecnici
- green
- Campo ammissibile
- grey
- Campo non ammissibile
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Repeat accuracy (gripping)
defined as the spread of the actual position per jaw during 100 consecutive closing or opening movements on a rigid workpiece or a fixed stop under constant conditions.
Repeat accuracy (positioning, unidirectional)
defined as the spread of the actual position per base jaw during 100 consecutive movements to a target position from the same direction under constant conditions.
Repeat accuracy (positioning, bi-directional)
defined as the distribution of the actual position per base jaw during 100 consecutive movements to a target position from both directions under constant conditions.
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Positioning accuracy
is defined as the deviation of the actual position per jaw during 100 consecutive, unidirectional positioning movements to a defined position under constant conditions.
Closing and opening times (positioning)
Closing and opening times are only the movement times of the fingers at max. speed, as well as max. acceleration with observance of the max. permissible mass per finger and refer to the traverse path per jaw and 50% of the nominal stroke.
Max. speed (positioning) and max. acceleration
is the arithmetic sum of the velocity and acceleration acting on each jaw.
Housing material
Aluminum alloy, anodized
Base jaw material
hard-anodized, high strength aluminum
Warranty
24 months or 5 million cycles (one cycle consists of a complete gripping process: "Open gripper" and "Close gripper")
Scope of delivery
Gripper including safety information and accessory kit with centering sleeves for gripper and finger mounting. Product-specific instructions and software can be downloaded at schunk.com/downloads-manuals and schunk.com/downloads-software.