RotoRi
Jaw turning fixture
Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Description
SCHUNK 고객이 얻는 혜택
- 유연성 증가
링 하나로 I.D. 및 O.D. 클램핑 - 광범위한 적용 분야
80-1,600mm 척 크기의 2, 3, 4 및 6죠 척에 적합 - 뛰어난 정밀도
터닝 지름의 0.1mm 정밀 조정 - 경제적 효율 향상
RotoFix 클램핑 핀을 통한 설치 비용 절감 및 척 조에 대한 비용 절감 - Fast and flexible handling
선삭 공구의 최적화된 접근성