The No. 1 for more than 30 years

The SCHUNK universal gripper PGN-plus-P is the most proven and versatile gripper on the market.

To the Shop

The technology of the new SCHUNK PGN-plus-P gripper has more to offer! With its powerful features, the PGN-plus-P is in a class of its own.

Profit from the benefits:

• Rapid and even lubricant distribution
  even with short strokes
• Reduced total cost of ownership (TCO)
• Permanently higher performance
• More compact, efficient systems
• Continuously reliable and robust

Go to the Shop

The SCHUNK gripper PGN-plus-P raises the bar even further for pneumatically actuated universal grippers. The optimized multi-tooth guidance with permanent lubrication sets a benchmark on the market. At the same time, the PGN-plus-P benefits from the unique range of SCHUNK accessories for virtually the entire range of all conceivable automated applications.

• Up to 50% longer gripper fingers

The improved multi-tooth guidance enables the use of even longer gripper fingers for the same gripper size due to higher maximum moments, without overloading the guidance. Gripping with optimized interfering contours during handling tasks in confined spaces, is thereby made even easier.

• Longest service life due to lubrication pockets in the multi-tooth guidance

The lubricant pockets in the multi-tooth guidance ensure a continuous grease supply. The advantage is an even lubricant film that is created rapidly, even with short strokes.

• Up to 50% higher gripping force

The enlarged surface of the drive piston in the compact installation space of the PGN-plus-P allows an increase of the gripping force. Heavier workpiece weights can be handled with the same gripper size.

• Up to 120% higher finger load is possible

For multi-tooth guidance with permanent lubrication, the supporting dimension between the six load-bearing shoulders was increased, thereby increasing the size of the guiding areas.

The SCHUNK gripper PGN-plus-P stands for diversity. You benefit from an unlimited flexibility. Choose from a wide range of high-quality PGN-plus-P accessory components for your individual application. Combine different options without compromises. Or decide on the reliable special versions if special environmental influences have to be taken into account.

Valves

SCHUNK micro valves in cylindrical design can be directly mounted on the gripper. This saves cycle time, cabling costs, and compressed air costs.

PGN-plus-P accessories

Sensor system

Unique variety of sensor systems e.g. magnetic switch MMs, inductive proximity switch IN, and much more.

MMS 22-PI 2

Versions

• Gripping force maintenance version AS/IS
  The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/IS variant this acts as a closing force, in the IS variant as an opening force
• Corrosion-protected version K
  for use in corrosion-inducing atmospheres
• High-temperature version V/HT
  for use in hot environments
• Precision version P
  for the highest accuracy
• ATEX version EX
  for explosive environments
• Dustproof version SD
  absolutely dustproof, increased degree of protection against ingress of materials.
• Application-specific protective covers
  up to protection class IP67, for use in high-temperature ranges
• Additional versions
  Various options can be combined