ELB 70-H075-H-B-N-2-H1G
ID 1488309
- 最大行程: 75 mm
- 最大行程: 75 mm
- 最大传动力: 150 N
技术细节
| Drive concept | Linear direct drive |
|---|---|
| Stroke [mm] | 75.0 |
| Max. driving force [N] | 150.0 |
| Nominal force [N] | 40.0 |
| Max. payload (horizontal) [kg] | 6.0 |
| Repeat accuracy [mm] | ± 0.01 |
| Max. speed [m/s] | 4.0 |
| Max. acceleration [m/s²] | 100.0 |
| Max. current [A] | 10.0 |
| Max. standstill current [A] | 2.6 |
| Min. ambient temperature [°C] | 10.0 |
| Max. ambient temperature [°C] | 40.0 |
| Weight [kg] | 2.46 |
| Clearance N (for moment load) [mm] | 34.1 |
| Stroke measuring system interface | HIPERFACE® (SIL2/PLd) |
| Actuation holding brake | pneumatic |
| Static holding force break [N] | 350.0 |
| Axial play, brake [mm] | 0.3 |
| Moment Mx max. [Nm] | 79.0 |
| Moment My max. [Nm] | 54.0 |
| Moment Mz max. [Nm] | 27.0 |
| Force Fy max. [N] | 1210.0 |
| Force Fz max. [N] | 1210.0 |
| Force -Fz max. [N] | 1210.0 |
| H1 grease version | yes |
| Version with holding brake | yes |
Dimensions and maximum loads
Travel times for 50/75 mm stroke*
Travel times for 125 mm stroke*
Dimensions and maximum loads
The indicated torques and forces are maximum values for static load in order to achieve the maximum lifespan of the product. Depending on use, increased loads are possible; please contact us to find out more!
Travel times for 50/75 mm stroke*
- X 轴:
- Stroke
- Y 轴:
- Travel times
Travel times for 125 mm stroke*
- X 轴:
- Stroke
- Y 轴:
- Travel times
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Payload
is the weight of the total weight which is attached to the cantilever arm. Please consider that service life will shorten if the maximum payload is exceeded. SCHUNK cannot assume any warranty for this.
Führung
Kreuzrollenführung
Antrieb
Lineardirektantrieb basierend auf einem 3-phasigen, elektronisch kommutierten und permanenterregten AC-Synchron-Linearmotor
Wegmesssystem
Berührungsloses, magnetisches Messsystem in absoluter und inkrementeller Ausführung, mit den Schnittstellen HIPERFACE®, 1Vss und DRIVE-CLiQ.
Profil
Aluminiumprofil mit spielfrei vorgespannter Kreuzrollenführung
Schlitten
Aluminiumschlitten, Primärteil und Messsystemlesekopf direkt integriert
Lieferumfang
Sicherheitsinformationen (produktspezifische Anleitungen online verfügbar)
Antriebsregler
Beratung zu Parametereinstellungen für Antriebsregler BOSCH (IndraDrive, IndraDrive CS) und Siemens (Sinamics S120). Bereitstellung von Motordatenblätter für andere Antriebsregler. Inbetriebnahme-Unterstützung auf Anfrage.
Gewährleistung
24 Monate
Lebensdauerkennwerte
auf Anfrage