arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO BT-DC 40 Ø5x90 图片仅供参考

CELSIO BT-DC 40 Ø5x90

热缩刀柄

ID 1428307

CELSIO BT-DC 40 Ø5x90, 刀柄
  • 热缩刀柄
  • 系列: CELSIO
  • 双重定位版本
  • 刀具夹持接口: BT-DC 40
  • 夹持直径: 5 mm
  • 突出长度: 90 mm
  • 回转精度: 在夹持孔中测量值 ≤ 0.003 mm(根据 DIN 69882-8 标准)
  • 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
  • 最小扭矩: 8 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface BT-DC 40
Clamping diameter D1 5 mm
D2 [mm] 17.0
D6 [mm] 12.0
Projecting length L1 [mm]/[inch] 90 mm / 3.5"
L4 [mm] 63.0
Min. torque [Nm] 8.0
Weight [kg] 1.1
Dual Contact variant yes
Coolant-proof yes
Standard length yes

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore for data carrier as an option

Toolholder changes
For automatic toolholder changes

Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport

Face contact
Similar to DIN ISO 7388-2 JD/JF however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces

Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)

Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)

Individual
Additional sizes and customized designs are available upon request