Universal rotary unit
Using the electric holding brake
The installed brake is only designed to be used as a holding brake. Consequently, it may only be actuated when stationary. Use as an operating brake is not permitted and significantly increases wear.
Design with IP54 option
With the IP54 option, increased friction is caused by the seals (top and bottom). These have a minor effect on the cycle time in a normal positioning process (< 360°). In this case, the ERT can be designed with the IP54 option in the design tool on the homepage. When used as a rotary drive (continuous rotary movement), the friction of the seals (top and bottom) reduces the available input torque. In this case, additional factors must be taken into account during the design. Please contact us.
The electrical ERT rotary module is partially available with UL certification (certified according to US and Canadian regulations) on request. Please contact us.
Certified encoder system
The encoder system with the DRIVE-CLiQ interface is certified according to SIL2/PLd. This means that even demanding applications with high requirements in the area of machine safety can be implemented. Please contact us for further information.
HIPERFACE DSL® encoder interface
The HIPERFACE DSL® encoder interface is a purely digital motor feedback protocol. Due to the single cable technology, it is possible to save costs, it requires less space and it is easy to implement.