arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

Whistle Notch mountings

Mechanical Toolholding Systems

The Whistle Notch mountings can be used to reliably clamp tools with a lateral clamping surface on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835E and DIN 6535E. The clamping screw and length adjustment screw are included in the scope of delivery.
Whistle Notch mountings

Whistle Notch mountings

The Whistle Notch mountings can be used to reliably clamp tools with a lateral clamping surface on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835E and DIN 6535E. The clamping screw and length adjustment screw are included in the scope of delivery.
Show series
23001976
HSK-A 63 
12 mm 
90 mm / 3.5" 
23001982
HSK-A 63 
32 mm 
110 mm / 4.3" 
23001868
HSK-A 100 
6 mm 
90 mm / 3.5" 
23003884
SCHUNK CAPTO C6 
12 mm 
80 mm / 3.1" 
23000288
HSK-A 63 
6 mm 
80 mm / 3.1" 
23001979
HSK-A 63 
18 mm 
100 mm / 3.9" 
23001980
HSK-A 63 
20 mm 
100 mm / 3.9" 
23001981
HSK-A 63 
25 mm 
110 mm / 4.3" 
23001870
HSK-A 100 
10 mm 
90 mm / 3.5" 
23001871
HSK-A 100 
12 mm 
100 mm / 3.9"