GSW-B 50-Z
ID 308421
- Max. ambient temperature: 90 °C
- Shank diameter: 20 mm
Technical details
| 重量 [kg] | 0.2 |
|---|---|
| 最大許容RPM [1/min] | 20.0 |
| 定格作動圧力 (圧縮空気) [bar] | 6.0 |
| 圧縮空気の最小作動圧 [bar] | 4.0 |
| 圧縮空気の最大作動圧 [bar] | 8.0 |
| 定格作動圧力 (クーラント) [bar] | 40.0 |
| クーラントの最小作動圧力 [bar] | 20.0 |
| クーラントの最大作動圧力 [bar] | 50.0 |
| IP 保護等級 | 40 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 90.0 |
| D 径 [mm] | 52.0 |
| 高さ Z [mm] | 66.0 |
| センターグリッパー用として準備 | あり |
適切なグリッパーを別途発注する必要があります。
グリッパー固有の値については以下のページを参照してください。
寸法と最大荷重
Maximal zulässige Auskragung
把持力、外径把持
把持力、外径把持
把持力、外径把持
把持力、内径把持
把持力、内径把持
把持力、内径把持
寸法と最大荷重
力とトルクに対応するそれぞれのグリッパーのサイズを参照してください。
Maximal zulässige Auskragung
把持力、外径把持
- X-axis:
- フィンガー長
- Y-axis:
- 把持力
把持力、外径把持
- X-axis:
- フィンガー長
- Y-axis:
- 把持力
把持力、外径把持
- X-axis:
- フィンガー長
- Y-axis:
- 把持力
把持力、内径把持
- X-axis:
- フィンガー長
- Y-axis:
- 把持力
把持力、内径把持
- X-axis:
- フィンガー長
- Y-axis:
- 把持力
把持力、内径把持
- X-axis:
- フィンガー長
- Y-axis:
- 把持力
General notes about the series
Gripping force
refers to the combination of a GSW-B with a correspondingly named gripper, and represents the minimum sufficient gripping force.
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Closing and opening times
the indicated times depend on the flow rate and pressure of the drive medium and the therefrom resulting electrical resistances.
Operating principle
Pressure distributor and wedge-hook kinematics
Housing material
Aluminum alloy, anodized
Base jaw material
Blackened steel
Spindle interface material
Aluminum alloy
Actuation
hydraulically with machine coolant (filtered, max. particle size of 30 µm) or pneumatically with filtered compressed air in accordance with ISO 8573-1:2010 [7:4:4].
Warranty
24 months
Service life characteristics
on request
Scope of delivery
Fastening screws, centering elements, assembly instructions (operating manual with declaration of incorporation is available online). The gripper is not included and must be ordered separately in the desired version.