AOV-10-5-V
随机轨道砂光机
ID 1434818
请注意，该产品已停产且不再供应。
可替代的升级版产品：
随机轨道砂光机 AOV, 尺寸: 10, 气动, 可选的吸入连接
- Z 向补偿: 12.7 mm
- 力 Fz max.: 66.7 N
技术细节
| 研磨盘尺寸 | 125 mm (5'') |
|---|---|
| Z 向补偿 [mm] | 12.7 |
| 建议补偿路径 [mm] | ± 5 |
| 最小延伸补偿力 [N] | 13.3 |
| 最大延伸补偿力 [N] | 66.7 |
| 最小回缩补偿力 [N] | 6.7 |
| 最大回缩补偿力 [N] | 33.3 |
| 最小补偿压力 [bar] | 1.0 |
| 最大补偿压力 [bar] | 4.1 |
| 研磨行程 [mm] | 5.0 |
| 怠速 [1/min] | 10000.0 |
| 工作压力 [bar] | 6.2 |
| 噪音排放 [dB(A)] | < 85 |
| 最大耗气量 [l/s] | 9.5 |
| 空气连接电机 | 10 mm |
| 补偿空气接口 | 4 mm |
| 重量 [kg] | 2.68 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 35.0 |
| 直径 D [mm] | 125.0 |
| 高度 Z [mm] | 148.0 |
| 力 Fz max. [N] | 66.7 |
| 可选的吸入连接 | 是 |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated forces show the maximum payload.
General notes about the series
Ambient conditions
Please note that the unit is notsuitable for use in an area where coolants or cutting fluids are present.
Mounting
on the robot arm or as a stationary unit
Actuation
pneumatic, via filtered (<5 µm, dry) and oiled compressed air (2-3 drops per hour)
Warranty
24 months