KSX-E 125-430-CI IOL
ID 1601447
产品特性：
- 无系统卡爪
- 通过 IO-Link 控制
- 连续可编程的夹持力
- 连续可编程的夹持行程
- 卡爪预定位
- 气动介质传输到系统卡爪
- IO-Link 接口: 固定连接电缆
- 尺寸: 125 x 520 x 150 mm
- 基本夹持行程: 120 mm
- 夹持力: 6 - 40 kN
- 工作电压控制装置: 24 V DC
- 工作电压执行器: 48 V DC
- 重量: 32 kg
技术细节
| Width of the clamping vise [mm] | 125.0 |
|---|---|
| Min. clamping force [kN] | 6.0 |
| Max. clamping force [kN] | 40.0 |
| Operating voltage control unit [V DC] | 24.0 |
| Operating voltage actuator [V DC] | 48.0 |
| Basic clamping stroke [mm] | 120.0 |
| Weight [kg] | 32.0 |
Scope of delivery
Vise, operating manual; without system jaws, without connection cable for integration into the machine control
Programmable clamping force
The clamping force can be continuously adjusted via the software in a range from 6 kN to 40 kN per chuck jaw.
Jaw pre-positioning and programmable clamping stroke
The jaws can be pre-positioned depending on the workpiece size so that the clamping stroke and clamping time can then be reduced to a minimum during automated loading processes.
Pneumatic media transfer into the system jaw
For workpiece contact control via dynamic pressure or cleaning of the clamping surfaces The system jaws must be prepared accordingly by the customer.
Clamping range
To cover the entire clamping range from 5 to 420 mm, the vise must be extended with the corresponding drawbar extension (see accessories).