CMS 100-A
ID 1545366
- フルードフィードスルーの数: 12
- 力 Fz 最大: 1800 N
- 最大合計有効加重: 43 kg
技术细节
| 推奨ハンドリング重量 [kg] | 43.0 |
|---|---|
| 繰り返し精度 [mm] | 0.02 |
| 重量 [kg] | 1.04 |
| 空圧フィードスルーの数 | 12.0 |
| ラジアル使用のためのフィードスルー | 12.0 |
| エア接続ネジ空圧フィードスルー（半径） | G1/8" |
| カップリング・フランジ、ツール側 | ISO 9409-1-100-6-M8 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 60.0 |
| 高さ Z [mm] | 28.0 |
| ネジ接続の図 | J |
| 最大静的引張力 Fz [N] | 1800.0 |
| 動的最大モーメント Mx/My [Nm] | 230.0 |
| 動的最大モーメント Mz [Nm] | 230.0 |
| 静的最大モーメント Mx/My [Nm] | 500.0 |
| 静的最大モーメント Mz [Nm] | 1185.0 |
Dimensions and maximum loads
Load diagram
Dimensions and maximum loads
This is the sum of all static loads that are permitted to act on the change system to ensure error-free functioning.
Load diagram
Maximum handling weight as a function of acceleration and lever arm (by Mx/My). The diagram does not replace the technical design.
- X 轴:
- Lever arm
- Y 轴:
- Weight
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
Manual via locking lever
Operating principle
The head and adapter are locked and unlocked with a pin by operating the manual lever.
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months