CMS 100-K
ID 1545364
- 活塞行程监控: 可选项
- 流体通路数量: 12
- 力 Fz max.: 1800 N
- 最大总荷载: 43 kg
技术细节
| 建议搬运重量 [kg] | 43.0 |
|---|---|
| 锁定监测 | 可选项 |
| 工具到位监测 | 可选项 |
| 重复精度 [mm] | 0.02 |
| 重量 [kg] | 1.65 |
| 气路数量 | 12.0 |
| 用于径向使用的通道 | 12.0 |
| 气路通道空气接口螺纹（径向） | G1/8" |
| 机器人侧连接法兰 | ISO 9409-1-100-6-M8 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 60.0 |
| 螺钉连接图 | J |
| 最大静态拉力 Fz [N] | 1800.0 |
| 最大动态力矩 Mx/My [Nm] | 230.0 |
| 最大动态力矩 Mz [Nm] | 230.0 |
| 最大静态力矩 Mx/My [Nm] | 500.0 |
| 最大静态力矩 Mz [Nm] | 1185.0 |
尺寸和最大载荷
荷载图
尺寸和最大载荷
这是在确保无障碍运行的情况下，允许作用于快换系统的静态负载总和。
荷载图
最大搬运重量是加速度和杆臂的函数（通过 Mx/My 显示）。该图表不可取代技术设计图。
- X 轴:
- 杆臂
- Y 轴:
- 重量
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
Manual via locking lever
Operating principle
The head and adapter are locked and unlocked with a pin by operating the manual lever.
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months