ROTA NCML
Hybrid chuck with manual workpiece centering
3죠 수동 선반 척을 통한 센터링과 모든 강자성 구성품의 무변형 자기 클램핑 기술을 결합한 하이브리드 척입니다.
Description
SCHUNK 고객이 얻는 혜택
- 수동 3죠 쐐기 바 척을 통한 공작물 센터링
공작물의 수동 정렬 불필요 - 변형 없는 자기 공작물 클램핑
최대 방사형 및 축 흔들림 허용값 - 높은 자기 유지력
공작물 형태와 재료에 따라 높은 절삭 성능 가능 - 내부 및 외부 센터링
범용 및 유연한 사용 - 최적의 방진 밀폐, 캡슐화된 센터링 척
낮은 유지보수 및 높은 클램핑 정확도 보장 - 센터링 죠의 표준 인터페이스
센터링 죠는 SCHUNK 표준 죠에서 제조될 수 있습니다. - 죠 지지로 인한 높은 고정력
하드 터닝에서 특히 개선된 절삭 성능 - 그라인딩 및 하드 터닝용
고정밀 공작물 기계가공에 이상적 - 수평 및 수직 기계용
거의 모든 머신 툴과 함께 사용하기에 적합(터닝 – 밀링 – 그라인딩) - 수축 가능한 죠 때문에 3면 기계가공 가능
설정 비용 감소, 공정 시간 단축
Options and special information
- Low-deformation clamping of rings and fitting disks
The ROTA NCML is a combination of manual lathe chuck and magnetic clamping chuck. The manual lathe chuck serves to center the workpiece on the chuck and then clamps it via the magnetic clamping chuck without deformation and vibration. Double AlNiCo magnets are integrated in the magnetic chuck, which allow for demagnetization of the workpiece after machining. - The hybrid chuck is controlled via a control unit or directly via the machine control system. The workpiece can also be lifted from the chuck using pole extensions, and then milled from three sides.