Fügen, Montieren, Einlegen, Be- und Entladen von Werkstücken sind alltägliche Herausforderungen in der Automatisierung. Damit es nicht zu Beschädigungen an Werkzeugen oder Werkstücken kommt, gewährleisten SCHUNK Ausgleichseinheiten mit rotatorischem- und Winkel Ausgleich die erforderliche Nachgiebigkeit zwischen z.B. Roboter und Werkzeugen. So lassen sich Anlagenstörungen durch Toleranzungenauigkeiten vermeiden und die Prozesssicherheit steigern.
Many Robot PLUS products are prepared as standard to be bolted directly to a robot's ISO 9409-1 flange.
Example: ISO 9409-1-125-6-M10 ISO 9409-1 describes the standard 125 corresponds to the bolt circle diameter 6- M10: 6 x M10 screws pre-installed in the unit
Many Robot PLUS products are prepared as standard to be bolted directly to a robot's ISO 9409-1 flange.
Example: ISO 9409-1-125-6-M10 ISO 9409-1 describes the standard 125 corresponds to the bolt circle diameter 6- M10: 6 x M10 screws pre-installed in the unit
Modular compensation unit with XY-compensation for the compensation of inaccuracies and tolerances. As part of the AGM product family, the AGM-XY can be flexibly combined with the AGM-Z and therefore always offers the right compensation behavior for a wide range of applications.
Modular compensation unit with z-axis flexibility for the compensation of inaccuracies and tolerances as well as differences in height. As part of the AGM product family, the AGM-Z can be flexibly combined with the AGM-XY and AGM-W and therefore always offers the right compensation behavior for a wide range of applications.
Modular compensation unit with angular compensation for the compensation of inaccuracies and tolerances. As part of the AGM product family, the AGM-W can be flexibly combined with the AGM-Z and therefore always offers the right compensation behavior for a wide range of applications.
Modular compensation unit for rotational compensation around the Z-axis. The AGM-R can be used flexibly as a stand-alone solution. The AGM-R can also be combined with the existing series of the AGM product family. This means the right compensation behavior is always achieved for your application – ideal for correcting orientation and position inaccuracies.
