arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
国の選択を変更して、お住まいの地域に関連する製品、サービス、および担当者に関する情報を表示します。
KOM SK 40 Ø32x60 图片仅供参考

KOM SK 40 Ø32x60

面铣刀适配器

ID 263626

納期はお問い合わせください
KOM SK 40 Ø32x60, 刀柄
  • 面铣刀适配器
  • 系列: 面铣刀适配器
  • 刀具夹持接口: SK 40
  • 夹持直径: 32 mm
  • 夹持直径的螺纹: M16
  • 突出长度: 60 mm
  • 回转精度: 从锥体到 D1 测量 ≤ 0.006 mm
  • 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
标配范围: 包括拧紧螺栓、传动环和导向键
Technology Combination shell and end mill adapters
Series Combination shell and end mill adapters
Toolholder interface SK 40
Toolholder standard DIN ISO 7388-1 AD/AF
Clamping diameter D1 32 mm
Thread tightening bolt G M16
D2 [mm] 58.0
Projecting length L1 [mm]/[inch] 60 mm / 2.4"
L4 [mm] 40.9
L11 [mm] 38.0
L12 [mm] 24.0
Weight [kg] 1.75
Coolant-proof yes
Standard length yes

Version
For mounting cutters with longitudinal or crosswise slot

Run-out accuracy
≤ 0.006 mm measured from taper to D1

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Data carriers
Bore holes for data carriers according to DIN 69873

Toolholder changes
For automatic toolholder changes

Coolant supply
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed for transport

Scope of delivery
Includes tightening bolt, drive ring, and feather key

Individual
Additional sizes and customized designs are available upon request