KSX-C2
Etau à 5 axes
Étau à 5 axes avec centre de serrage réglable, course de serrage de base la plus grande et fonction de traction descendante active des mors pour l'usinage complet et précis de la sixième face.
Description
Advantages – Your benefits
- Active jaw pull-down
Optionally allows complete and precise machining of the sixth side - Jaw quick-change without any tools
Adjustment to new clamping tasks within seconds - Adjustable clamping center
Small and large workpieces are always clamped centrically - Long basic clamping stroke with 130 mm
Wide range of applications without additional extensions - Extendable clamping range
Enables clamping of various workpiece lengths - Optimal accessibility
Allows the workpiece to be machined from five sides - Integrated elastomer damping
To minimize vibrations during machining - Wide range of applications
Suitable for rough and finished parts machining - Wide jaw program
Optimal adaptation to new clamping tasks - Clamping by tension
No bending of base body - VERO-S interface
Versatile range of combinations thanks to the VERO-S modular system for even shorter set-up times.
Options and special information
- The 5-axis vise for 6-sided machining
The single-acting vise KONTEC KSX-C2 combines several unparalleled features for 5-axis machining. An adjustable clamping center, optimum accessibility to the workpiece and the basic clamping stroke of 130 mm make the KSX-C2 an incredibly versatile clamping device. The absolute highlight is the active pull-down function of the vise integrated by default. This is done by locking the second jaw and allows a complete and precise machining of the sixth side without conversion to other dimensions. - A new jaw quick-change system enables the exchange of a large number of system jaws with each other within a few seconds and completely without tools. In combination with drawbar extensions, the KSX-C2 can be quickly and easily adapted to any new requirement. Due to the integrated VERO-S interface, clamping pins can be directly screwed into the base body, and the 5-axis vise can be located on the quick-change pallet system.