CPS 046-K
ID 1590984
- Lock sensing: prepared
- No. of fluid feed-throughs: 2
- Force Fz max.: 5800 N
Technical details
| Rilevamento blocco | preparato |
|---|---|
| Forza di bloccaggio [N] | 5800.0 |
| Forza di bloccaggio fornita dalla forza di richiamo [N] | 104.0 |
| Precisione di ripetibilità [mm] | 0.015 |
| Peso [kg] | 2.0 |
| Distanza max. nel bloccaggio [mm] | 2.5 |
| Numero dei passanti pneumatici | 2x G1/8" |
| Numero dei passanti pneumatici | 2x M5 |
| Blocco/sblocco collegamento principale | G1/8" |
| Disassamento massimo consentito XY [mm] | ± 1.5 |
| Offset XY angolare max consentito [°] | ± 1 |
| Offset Z angolare max consentito [°] | ± 2 |
| Collegamento lato robot | ISO 9409-1-100-6-M8 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 60.0 |
| Pressione d'esercizio min. [bar] | 4.5 |
| Pressione di esercizio max. [bar] | 7.0 |
| Pressione d'esercizio nominale [bar] | 6.0 |
| Diagramma di collegamento viti | 5 x J |
| Tempo di apertura [s] | 0.1 |
| Tempo di chiusura [s] | 0.1 |
| Portata a 6 bar (per distributore) | 650 l/min (G1/8") |
| Portata a 6 bar (per distributore) | 150 l/min (M5) |
| Coppia dinamica max Mx [Nm] | 350.0 |
| Coppia dinamica max My [Nm] | 350.0 |
| Coppia dinamica max Mz [Nm] | 400.0 |
| Max coppia statica Mx [Nm] | 1050.0 |
| Max coppia statica My [Nm] | 1050.0 |
| Coppia statica max. Mz [Nm] | 1200.0 |
| Forza Fx max [N] | 14000.0 |
| Forza Fy max [N] | 14000.0 |
| Forza Fz max [N] | 5800.0 |
| Forza Fx massima dinamica [N] | 4600.0 |
| Forza Fy massima dinamica [N] | 4600.0 |
| Forza Fz massima dinamica [N] | 1950.0 |
Carichi max.
Tabella carichi
Carichi max.
È la somma di tutti i carichi statici che possono agire sul cambio utensile.
Tabella carichi
- X-axis:
- Braccio leva
- Y-axis:
- Capacità di carico
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Minimum pressure
The minimum pressure is the required minimum pressure to lock the system. This pressure must be continuously present during operation.
Self-retaining
The automatic tool changer has a self-retaining feature that prevents the tool from falling off in case of the pressure drop. The change master and change adapter can be separated by pneumatically actuating the piston.
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
piston-actuated balls with integrated spring (to support the locked piston position)
Media transmission
variable via attachment feed-through modules, depending on the unit size
Housing
The housing consists of high-strength, hard-coated aluminum alloy The functional components are made of hardened corrosion free steel.
Warranty
24 months
Service life characteristics
on request