EZU 30-PN-N-SD
ID 1582003
- 单指行程: 20 mm
- 最小抓取力: 210 N
- 最大抓取力: 350 N
- 能源供应: 24 V
- 最高环境温度: 55 °C
技术细节
| 单指行程 [mm] | 20.0 |
|---|---|
| 最小抓取力 [N] | 210.0 |
| 最大抓取力 [N] | 350.0 |
| 最大允许手指长度 [mm] | 80.0 |
| 每个手指的最大允许重量 [kg] | 0.4 |
| 重复精度（抓取） [mm] | 0.02 |
| 重复精度（单向定位） [mm] | 0.05 |
| 重复精度（双向定位） [mm] | 0.15 |
| 闭合时间 [s] | 0.6 |
| 打开时间 [s] | 0.6 |
| 最高速度（定位） [mm/s] | 40.0 |
| 最大加速度 [mm/s²] | 150.0 |
| 重量 [kg] | 2.3 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 55.0 |
| IP 防护等级，电子装置 | 67 |
| IP 防护等级，导轨/基爪 | 64 |
| 洁净室等级 ISO 14644-1:2015 | 4 |
| 额定电压 [V] | 24.0 |
| 通信接口 | PROFINET |
| BasicGrip（基础夹持）额定电流消耗 [A] | 0.14 |
| BasicGrip（基础夹持）最大电流消耗 [A] | 0.67 |
| 逻辑额定电流消耗 [A] | 0.16 |
| 逻辑最大电流消耗 [A] | 0.2 |
| 力矩 Mx max. [Nm] | 32.0 |
| 力矩 My max. [Nm] | 35.0 |
| 力矩 Mz max. [Nm] | 32.0 |
| 最大轴向力 Fz max。 [N] | 800.0 |
| 防尘型 | 是 |
尺寸和最大载荷
有夹持力维持功能的型号
无夹持力保持功能的型号
尺寸和最大载荷
所示力矩和力为静态值，作用于每个基爪，不能同时存在。
有夹持力维持功能的型号
- X 轴:
- 手指长度
- Y 轴:
- 抓取力
无夹持力保持功能的型号
- X 轴:
- 手指长度
- Y 轴:
- 抓取力
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Repeat accuracy (gripping)
defined as the spread of the actual position during 100 consecutive closing or opening movements on a rigid workpiece or a fixed workpiece stop under constant conditions.
Repeat accuracy (positioning, unidirectional)
defined as the spread of the actual position per base jaw during 100 consecutive movements to a target position from the same direction under constant conditions.
Repeat accuracy (positioning, bi-directional)
defined as the distribution of the actual position per base jaw during 100 consecutive movements to a target position from both directions under constant conditions.
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Closing and opening times (positioning)
Closing and opening times are only the movement times of the fingers at max. speed, max. acceleration with observance of the maximum permissible masses per finger and refer to 50% of the available stroke per jaw in the basic version.
Max. speed (positioning) and max. acceleration
is the speed and acceleration acting on each jaw.
Housing material
Aluminum alloy, anodized
Base jaw material
Steel, corrosion-protected
Warranty
24 months or 5 million cycles BasicGrip / 3 million cycles StrongGrip (one cycle consists of a complete gripping process: "Open gripper" and "Close gripper")
Scope of delivery
Gripper including safety information and accessory kit with centering sleeves for gripper and finger mounting. Product-specific instructions and software can be downloaded at schunk.com/downloads-manuals and schunk.com/downloads-software.