MEG 50 EC
ID 306010
可替代的升级版产品：
- 单指行程: 8.5 mm
- 最小抓取力: 60 N
- 最大抓取力: 90 N
- 能源供应: 24 V DC
- 最大总电流: 1.5 A
- 最高环境温度: 55 °C
技术细节
| 单指行程 [mm] | 8.5 |
|---|---|
| 最小抓取力 [N] | 60.0 |
| 最大抓取力 [N] | 90.0 |
| 建议工件重量 [kg] | 0.45 |
| 最大允许手指长度 [mm] | 50.0 |
| 每个手指的最大允许重量 [kg] | 0.14 |
| 重复精度 [mm] | 0.02 |
| 闭合时间 [s] | 0.3 |
| 打开时间 [s] | 0.3 |
| 最大速度 [mm/s] | 35.0 |
| 重量 [kg] | 0.71 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 55.0 |
| IP 防护等级 | 30 |
| 长度 X [mm] | 50.0 |
| 宽度 Y [mm] | 50.0 |
| 高度 Z [mm] | 90.5 |
| 额定电压 [V DC] | 24.0 |
| 额定电流 [A] | 0.9 |
| 最大电流 [A] | 1.5 |
| 控制器电子元件 | 外部 |
| 控制器类型 | MEG-C 050 |
| 通信接口 | 数字和模拟 I/O |
| 数字输入量 | 2.0 |
| 数字输出量 | 2.0 |
| 模拟输入量 | 3.0 |
| 模拟输出量 | 3.0 |
| 力矩 Mx max. [Nm] | 3.0 |
| 力矩 My max. [Nm] | 4.0 |
| 力矩 Mz max. [Nm] | 5.0 |
| 最大轴向力 Fz max。 [N] | 200.0 |
Dimensions and maximum loads
Maximum permitted finger projection
抓取力，内撑抓取
Maximal zulässige Auskragung
Dimensions and maximum loads
The indicated moments and forces are statical values, apply for each base jaw and may appear simultaneously. Loads may additionally occur to the moment produced by the gripping force itself.
Maximum permitted finger projection
抓取力，内撑抓取
- X 轴:
- P 点 - 手指长度
- Y 轴:
- 抓取力
Maximal zulässige Auskragung
Lmax entspricht der maximal zulässigen Fingerlänge, siehe technische Datentabelle.
- green
- Permitted range
- grey
- Inadmissible range
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
Closing and opening times
Minimum closing and opening times are merely the movement times of the base jaws or fingers at max. speed, max. acceleration, without current limitation (maximum current), and observance of the maximum permissible mass per finger.
Nominal currents
can be permanently actuated. With regard to all the currents which are ranging above the nominal current up to the maximum current, the notes of the individual product documentation has to be respected.
Operating principle
Wedge-hook kinematics
Housing material
Aluminum alloy, coated
Base jaw material
Steel
Actuation
electrically, via step motor or spindle
Warranty
24 months
Scope of delivery
Enclosed accessory pack with centering sleeves, assembly and operating manual with installation instructions. An external MEG-C controller and a KA connection cable or similar are required for operation of the MEG gripper. These are optionally available and are not include in the scope of delivery.