PGN-plus-P 200-1-P
ID 1317705
- 单指行程: 25 mm
- 闭合力: 3800 N
- 张开力: 4050 N
- 最高环境温度: 90 °C
Technical details
| Hub pro Backe [mm] | 25.0 |
|---|---|
| Schließkraft [N] | 3800.0 |
| Öffnungskraft [N] | 4050.0 |
| Schließkraft (bei Fingerlänge 0 mm) [N] | 4000.0 |
| Öffnungskraft (bei Fingerlänge 0 mm) [N] | 4300.0 |
| Eigenmasse [kg] | 5.4 |
| Empfohlenes Werkstückgewicht [kg] | 19.0 |
| Zylindervolumen pro Doppelhub [cm³] | 510.0 |
| Min. Betriebsdruck [bar] | 2.5 |
| Max. Betriebsdruck [bar] | 8.0 |
| Nennbetriebsdruck [bar] | 6.0 |
| Min. Sperrluftdruck [bar] | 0.5 |
| Max. Sperrluftdruck [bar] | 1.0 |
| Schließzeit [s] | 0.28 |
| Öffnungszeit [s] | 0.28 |
| Max. zulässige Fingerlänge [mm] | 310.0 |
| Max. zulässige Masse pro Finger [kg] | 6.5 |
| Schutzart IP | 40 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 90.0 |
| Wiederholgenauigkeit [mm] | 0.02 |
| Reinraumklasse ISO 14644-1 | 6 |
| Zertifizierungsstand Reinraumklasse ISO 14644-1 | 2015 |
| Länge X [mm] | 234.0 |
| Breite Y [mm] | 100.0 |
| Höhe Z [mm] | 90.8 |
| Moment Mx max. [Nm] | 215.0 |
| Moment My max. [Nm] | 200.0 |
| Moment Mz max. [Nm] | 250.0 |
| Max. Kraft axial Fz max. [N] | 12000.0 |
| Präzisions-Version | ja |
Dimensions and maximum loads
Maximum permitted finger projection
Greifkraft Außengreifen
Gripping force I.D. gripping
Maximum permitted finger projection
Dimensions and maximum loads
The indicated moments and forces are statical values, apply for each base jaw and may appear simultaneously. Loads may additionally occur to the moment produced by the gripping force itself.
Maximum permitted finger projection
Greifkraft Außengreifen
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force I.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Maximum permitted finger projection
Lmax is equivalent to the maximum permitted finger length, see the technical data table.
- green
- Permitted range
- grey
- Inadmissible range
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Finger length
is measured from the reference surface as the distance P in direction to the main axis. The maximum permissible finger length applies until the nominal operating pressure is achieved. With higher pressures, the finger length must be reduced proportionally to the nominal operating pressure.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
Closing and opening times
are movement times of the base jaws only, without application-specific gripper fingers. Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.
作動方式
表面動力伝達のウェッジギア
ハウジングの材質
アルミニウム
ベースジョーの材質
鋼鉄
作動
空圧式、フィルターを通した圧縮空気、ISO 8573-1:2010 [7:4:4] に準拠。
保証
36 カ月
寿命特性
ご要望によって
納品内容
近接スイッチ用ブラケット、センタリングスリーブと直接接続用 O リング、組立説明書(取扱説明書と包含宣言書はオンライン提供）
把持力の維持
把持力の機械式保持バージョンまたは圧力保持バルブ SDV-P 付きのバージョンを使用することで可能です。