RM 310-W90-1
ID 313009
- Couple: 22 Nm
Détails techniques
| Angle de rotation [°] | 90 |
|---|---|
| Réglage des fins de course [°] | 5 |
| Couple [Nm] | 22.0 |
| Indice de protection IP | 40 |
| Poids [kg] | 8.3 |
| Temps de rotation (1x angle de rotation nominal) sans charge embarquée [s] | 0.21 |
| Consommation de fluide (2x angle nominal) [cm³] | 251.0 |
| Pression d'utilisation nominale [bar] | 6.0 |
| Pression d'utilisation min. [bar] | 3.0 |
| Pression d'utilisation maximale [bar] | 8.0 |
| Température ambiante mini. [°C] | 5.0 |
| Température ambiant maxi. [°C] | 60.0 |
| Répétabilité [°] | 0.046 |
| Longueur X [mm] | 125.0 |
| Largeur Y [mm] | 250.0 |
| Hauteur Z [mm] | 162.0 |
| Moment My max. [Nm] | 380.0 |
| Force axiale max. Fz max. [N] | 2600.0 |
Pour une configuration des modules de pivotement, nous recommandons l'utilisation de notre logiciel Toolbox, disponible en ligne. La vérification du dimensionnement de l'unité choisie est impérativement nécessaire, sinon de surcharges sont possibles.
D’autres angles sont possibles sur demande.
Dimensions and maximum loads
Plage d'utilisation des amortisseurs
Dimensions and maximum loads
The indicated moments and forces are statical values and may appear simultaneously. Throttling has to be done for ensuring that the rotary movement takes place without impact or bouncing. Otherwise the service life reduces.
Plage d'utilisation des amortisseurs
- Axe X:
- Mass moment of inertia
- Axe Y:
- Angle of rotation
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Flange position
is always drawn in the left end position. It rotates from here to the right in clockwise direction. The arrow points out the direction of rotation.
Customized angle of rotation
More swivel angles are available on request.
Layout or control calculation
For configuration or control calculation of the units, we recommend to use our Toolbox software, which is available online. Verifying the sizing of the selected unit is absolutely necessary, as otherwise overloading may occur.
Swivel vane material
Steel
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Vane swivel unit
Scope of delivery
Completely ready for operation without bracket for proximity switch and without proximity switch
Warranty
24 months
Service life characteristics
on request