RM 310-W180-1
Ident.-Nr. 313010
- Drehmoment: 22 Nm
Technische Details
| Drehwinkel [°] | 180 |
|---|---|
| Endlageneinstellbarkeit [°] | 5 |
| Drehmoment [Nm] | 22.0 |
| Schutzart IP | 40 |
| Eigenmasse [kg] | 8.3 |
| Schwenkzeit (1 x Nenndrehwinkel) ohne Aufbaulast [s] | 0.26 |
| Fluidverbrauch (2x Nennwinkel) [cm³] | 251.0 |
| Nennbetriebsdruck [bar] | 6.0 |
| Min. Betriebsdruck [bar] | 3.0 |
| Max. Betriebsdruck [bar] | 8.0 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 60.0 |
| Wiederholgenauigkeit [°] | 0.046 |
| Länge X [mm] | 125.0 |
| Breite Y [mm] | 250.0 |
| Höhe Z [mm] | 162.0 |
| Moment My max. [Nm] | 380.0 |
| Max. Kraft axial Fz max. [N] | 2600.0 |
Zur Auslegung des Schwenkmoduls empfehlen wir den Einsatz unserer Software Toolbox, die online verfügbar ist. Eine Kontrollrechnung der ausgesuchten Einheit ist zwingend notwendig, da es sonst zu Überlastungen kommen kann.
Auf Anfrage sind auch andere Winkel möglich.
Dimensionen und max. Belastungen
Dämpfereinsatzbereich
Dimensionen und max. Belastungen
Die angegebenen Momente und Kräfte sind statische Werte und dürfen gleichzeitig auftreten. Die Drosselung muss immer vorgenommen werden, damit die Drehbewegung schlag- und prellfrei erfolgen kann. Ansonsten kann sich die Lebensdauer verringern.
Dämpfereinsatzbereich
- X-Achse:
- Massenträgheitsmoment
- Y-Achse:
- Drehwinkel
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Flange position
is always drawn in the left end position. It rotates from here to the right in clockwise direction. The arrow points out the direction of rotation.
Customized angle of rotation
More swivel angles are available on request.
Layout or control calculation
For configuration or control calculation of the units, we recommend to use our Toolbox software, which is available online. Verifying the sizing of the selected unit is absolutely necessary, as otherwise overloading may occur.
Swivel vane material
Steel
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Vane swivel unit
Scope of delivery
Completely ready for operation without bracket for proximity switch and without proximity switch
Warranty
24 months
Service life characteristics
on request