AGE-Z 2-050-1
N.º de identificação 324453
Produtos alternativos:
- Corsa di compensazione Z: 8 mm
- Peso del pezzo: 5 kg
- Forza Fz max: 200 N
- Forza Fd max.: 800 N
- Forza max. prodotta dalla molla: 40 N
Detalhes técnicos
| Corsa di compensazione Z [mm] | 8.0 |
|---|---|
| Peso consigliato di movimentazione, verticale [kg] | 5.0 |
| Forza di bloccaggio pos. ritratta a 6 bar [N] | 300.0 |
| Forza di bloccaggio pos. estratta a 6 bar [N] | 500.0 |
| Forza min. prodotta dalla molla [N] | 20.0 |
| Forza max. prodotta dalla molla [N] | 40.0 |
| Pressione d'esercizio min. [bar] | 2.5 |
| Pressione di esercizio max. [bar] | 6.0 |
| Precisione di ripetibilità [mm] | 0.02 |
| Collegamento lato robot | ISO 9409-1-50-4-M6 |
| Peso [kg] | 0.55 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 60.0 |
| Lunghezza X [mm] | 64.0 |
| Larghezza Y [mm] | 64.0 |
| Altezza Z [mm] | 53.0 |
| Coppia Mx max [Nm] | 10.0 |
| Coppia My max. [Nm] | 10.0 |
| Coppia Mz max [Nm] | 20.0 |
| Forza Fz max [N] | 200.0 |
| Forza max. Fd [N] | 800.0 |
Dimensioni e carichi massimi
Tabella carichi
Deviazione
Dimensioni e carichi massimi
Si tratta della somma massima di tutte le coppie e i carichi (forze e coppie di accelerazione, forze di processo, ecc.) che possono agire sulla unità di compensazione senza che il perfetto funzionamento ne risenta.
Tabella carichi
Deviazione
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Guidance system
Scope-free ball bearings
Monitoring
via magnetic switch or inductive proximity sensor
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
hard anodized aluminum alloy, functional parts made of hardened steel
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months