技术细节
| 传动概念 | 线性电机驱动 |
|---|---|
| 最大行程 H [mm] | 3800.0 |
| 最大传动力 [N] | 250.0 |
| 额定力 [N] | 105.0 |
| 最大有效载荷（水平） [kg] | 10.0 |
| 重复精度 [mm] | ± 0.01 |
| 最大速度 [m/s] | 4.0 |
| 最大加速度 [m/s²] | 40.0 |
| 最大电流 [A] | 7.5 |
| 停止时最大电流 [A] | 1.8 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 40.0 |
| 载重滑块和电机 [kg] | 2.54 |
| 端板重量 [kg] | 0.34 |
| 每 100 mm 行程的额外质量 [kg] | 0.88 |
| 长度 X [mm] | 224.0 |
| 宽度 Y [mm] | 118.0 |
| 高度 Z [mm] | 66.0 |
| 力矩 Mx max. [Nm] | 266.0 |
| 力矩 My max. [Nm] | 860.0 |
| 力矩 Mz max. [Nm] | 860.0 |
| 力 Fy max. [N] | 8308.0 |
| 力 Fz max. [N] | 8308.0 |
| 力 -Fz max. [N] | 8308.0 |
尺寸和最大载荷
尺寸和最大载荷
此处所示力和力矩均为静荷载的最大值。
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
How to get to the online configurator
The configurator is either linked on the SCHUNK website via the appropriate linear unit or can https://schunk.com/de/de/konfigurator-linearmodule called up directly.
Guidance
Roller guide
Drive
Linear direct drive based on a 3-phase, electronically commutated and permanently excited AC synchronous liner motor
Stroke measuring system
Contactless, magnetic measuring system with incremental and absolute variants; with HIPERFACE®, 1Vss and DRIVE-CLiQ interfaces.
Profile
Aluminum profile with ground profiled rail guide
Slide
Aluminum slide, primary part and measuring system reading head directly integrated
Scope of delivery
Accessory pack with centering sleeves and assembly and operating manual with declaration of incorporation
Drive controller
Consultation on parameter settings for drive controllers from BOSCH (EcoDrive CS, IndraDrive and IndraDrive CS) and Siemens (Sinamics S120). Provision of motor data sheets for other drive controllers. Commissioning support on request.
Warranty
24 months
Service life characteristics
on request