KOM SK40 Ø27x100
面铣刀适配器
ID 263625
KOM SK40 Ø27x100, 刀柄
- 面铣刀适配器
- 系列: 面铣刀适配器
- 刀具夹持接口: SK 40
- 夹持直径: 27 mm
- 夹持直径的螺纹: M12
- 突出长度: 100 mm
- 回转精度: 从锥体到 D1 测量 ≤ 0.006 mm
- 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
技术细节
Technology | Combination shell and end mill adapters |
---|---|
Series | Combination shell and end mill adapters |
Toolholder interface | SK 40 |
Toolholder standard | DIN ISO 7388-1 AD/AF |
Clamping diameter D1 | 27 mm |
Thread tightening bolt G | M12 |
D2 [mm] | 48 |
Projecting length L1 [mm]/[inch] | 100 mm / 3.9" |
L4 [mm] | 80.9 |
L11 [mm] | 33 |
L12 [mm] | 21 |
Weight [kg] | 2.05 |
Version
For mounting cutters with longitudinal or crosswise slot
Run-out accuracy
≤ 0.006 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed for transport
Scope of delivery
Includes tightening bolt, drive ring, and feather key
Individual
Additional sizes and customized designs are available upon request