KSF3 100-PM
ID 1448288
产品特性：
- 双爪夹具
- 中心夹紧
- 标准行程
- 气动端位置监控
- 气动触点监控
- 基爪: 细齿和榫槽
- 尺寸: 100 x 100 x 69,2 mm
- 夹持力范围: 7 - 12 kN
- 单指行程: 2 mm
- 最大卡爪高度: 60 mm
- 重复精度: 0.01 mm
- 打开压力: 6 - 9 bar
- 每个行程的耗气量: 500 cm³
- 闭合/张开时间: 0.2 s
- 重量: 4.5 kg
技术细节
| Stroke per jaw [mm] | 2.0 |
|---|---|
| Closing/opening time [s] | 0.2 |
| Weight [kg] | 4.5 |
| Distance H [mm] | 16.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 60.0 |
| Air consumption per stroke at 6 bar [cm³] | 500.0 |
| Min. clamping force [kN] | 7.0 |
| Max. clamping force [kN] | 12.0 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the chuck jaws at distance "H" at maximum pressure.
Clamping force range
The clamping force depends on the stroke due to the spring tension. Max. clamping force is reached in the "open" condition, min. clamping force in the "closed" condition.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213).