EOA-UR3510-SHK-050-E08-000
ID 1334788
可替代的升级版产品：
- 活塞行程监控: 在连接套件中可选
- 流体通路数量: 6
- 力 Fz max.: 900 N
- 最大总荷载: 11 kg
技术细节
| 建议搬运重量 [kg] | 11.0 |
|---|---|
| 锁定监测 | 在连接套件中可选 |
| 重复精度 [mm] | 0.02 |
| 重量 [kg] | 0.35 |
| 锁定时最大距离 [mm] | 1.0 |
| 气路数量 | 6.0 |
| 用于径向使用的通道 | 3.0 |
| 分度圆直径 [mm] | 50.0 |
| 连接法兰根据 | ISO 9409-1-50-4-M6 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 60.0 |
| 直径 D [mm] | 63.0 |
| 高度 Z [mm] | 26.5 |
| 螺钉连接图 | S5/S7 über Adapterplatte |
| 最大动态力矩 Mx/My [Nm] | 35.0 |
| 最大动态力矩 Mz [Nm] | 27.0 |
| 力矩 Mx max. [Nm] | 75.0 |
| 力矩 My max. [Nm] | 75.0 |
| 力矩 Mz max. [Nm] | 135.0 |
| 最大静态拉力 Fz [N] | 900.0 |
| 传输类型 | 信号 |
| 针脚触点数量 | 8.0 |
| 额定电流 [A] | 1.5 |
| 直流电 [V DC] | 30.0 |
| 电气接头 | M8 插座，8 针 |
| 电气连接插座 | 切向（右侧） |
尺寸和最大载荷
尺寸和最大载荷
这是保持正常运行时允许施加到快换系统上的所有力和力矩之和的最大值。
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
Manual via locking lever
Operating principle
by turning the locking lever, the head and adapter are locked and unlocked.
Media transmission
Optional via electrical modules and/or fluid modules. Pneumatic feed-through already integrated.
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months