DDF 2-050-E4
ID 323060
- 電気フィードスルーの数: 4
- ワーク重量: 10 kg
- 力 Fz 最大: 400 N
- 力 Fd 最大: 4000 N
技術的詳細
| フィードスルー | 電気フィードスルー |
|---|---|
| 推奨ハンドリング重量 [kg] | 10.0 |
| 最大駆動速度 [1/min] | 120.0 |
| 回転の最大速度 [°/s] | 720.0 |
| 定格トルク [Nm] | 1.0 |
| 開始トルク [Nm] | 1.3 |
| 回転角度 [°] | > 360 |
| 最大空気圧エアパージ [bar] | 1.0 |
| 電気フィードスルーの数 | 4.0 |
| 重量 [kg] | 0.45 |
| ロボット側接続 | ISO 9409-1-50-4-M6 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 60.0 |
| 最大動的曲げモーメント Mx* [Nm] | 25.0 |
| 最大動的曲げモーメント My* [Nm] | 25.0 |
| 最大動的ねじりモーメント Mz* [Nm] | 20.0 |
| 最大剪断力 Fq* [N] | 100.0 |
| D 径 [mm] | 78.0 |
| 高さ Z [mm] | 36.0 |
| 曲げモーメント Mx [Nm] | 80.0 |
| 曲げモーメント My [Nm] | 80.0 |
| 力 Fz 最大 [N] | 400.0 |
| 最大力 Fd [N] | 4000.0 |
真空フィードスルーのバージョンは、リクエストに応じてご利用いただけmます。お問い合わせください。
寸法と最大荷重
寸法と最大荷重
静的な力とモーメントがロータリーフィードスルーに作用する場合があります
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Mounting
Standardized ISO 9409 interface (robot-side)
Housing
high-strength, hard-coated aluminum alloy
Scope of delivery
Rotary feed-through in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months