CDB-8-11-ATC
Entgratwerkzeug
ID 1435108
This product has been discontinued and is no longer available.
Learn more and get in touch here.
Entgratwerkzeug CDB, Baugröße: 008, kein Antrieb
- Ausgleichsweg Z: 8 mm
- Kraft Fz max.: 67 N
Technical details
| Max. Ausgleichswinkel X [°] | ± 5.5 |
|---|---|
| Max. Ausgleichswinkel Y [°] | ± 5.5 |
| Ausgleichsweg Z [mm] | 8.0 |
| Eigenmasse [kg] | 1.09 |
| Luftanschlussschlauch | 4 mm |
| Werkzeugaufnahme | Klingenhalter für Entgratwerkzeuge des Typs B, C, D, E und F |
| Werkzeugwechsel | automatisch |
| Achsfixierung | integriert |
| Min. Ausgleichskraft radial [N] | 25.0 |
| Max. Ausgleichskraft radial [N] | 76.0 |
| Min. Ausgleichskraft axial [N] | 13.0 |
| Max. Ausgleichskraft axial [N] | 67.0 |
| Min. Ausgleichsdruck [bar] | 1.0 |
| Max. Ausgleichsdruck [bar] | 4.1 |
| Durchmesser D [mm] | 66.7 |
| Höhe Z [mm] | 193.7 |
| Kraft Fx max. [N] | 76.0 |
| Kraft Fy max. [N] | 76.0 |
| Kraft Fz max. [N] | 67.0 |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated forces show the maximum payload.
General notes about the series
Ambient conditions
Please note that the unit is notsuitable for use in an area where coolants or cutting fluids are present.
Mounting
on the robot arm or as a stationary unit
Warranty
24 months