CMS 050-K
Ident.-Nr. 1545289
- Kolbenhubabfrage: optional
- Anzahl Fluiddurchführungen: 6
- Kraft Fz max.: 900 N
- Max. Gesamtzuladung: 11 kg
Technische Details
| Empfohlenes Handlinggewicht [kg] | 11.0 |
|---|---|
| Verriegelungsabfrage | optional |
| Werkzeuganwesenheitsabfrage | optional |
| Wiederholgenauigkeit [mm] | 0.02 |
| Eigenmasse [kg] | 0.27 |
| Anzahl Pneumatikdurchführungen | 6.0 |
| Radial nutzbare Durchführungen | 6.0 |
| Luftanschlussgewinde Pneumatikdurchführung (radial) | M5 |
| Anschlussflansch roboterseitig | ISO 9409-1-50-4-M6 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 60.0 |
| Anschraubbild | S7 |
| max. statische Zugkraft Fz [N] | 900.0 |
| Max. dynamisches Moment Mx/My [Nm] | 35.0 |
| Max. dynamisches Moment Mz [Nm] | 27.0 |
| Max. statisches Moment Mx/My [Nm] | 75.0 |
| Max. statisches Moment Mz [Nm] | 135.0 |
Dimensions and maximum loads
Belastungsdiagramm
Dimensions and maximum loads
This is the sum of all static loads that are permitted to act on the change system to ensure error-free functioning.
Belastungsdiagramm
Maximales Handlinggewicht in Abhängigkeit von Beschleunigung und Hebelarm (um Mx/My). Das Diagramm ersetzt nicht die technische Auslegung.
- X-Achse:
- Lever arm
- Y-Achse:
- Weight
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
Manual via locking lever
Operating principle
The head and adapter are locked and unlocked with a pin by operating the manual lever.
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months