RCG
機能
단면도
단면도
배터리 셀은 원형 셀 그리퍼 내부의 강력한 영구적 마그넷에 의해 고정됩니다. 영구적 마그넷은 피스톤 챔버 내 위치 변경에 의해 공압식으로 활성화됩니다. 공압 피스톤을 통해 영구적 마그넷이 워크피스에 접근 또는 멀어져서 "활성화" 또는 "비활성화"됩니다.
- 1
-
공압 드라이브
피스톤 스트로크 모니터링 시스템용 C 슬롯 포함 - 2
-
전기적으로 분리된 접촉면
평평하게 접촉된 충전된 배터리 셀을 보호합니다 - 3
-
센터링
버전 -2와 -4의 센터링은 배터리 셀을 집어들 때 배치 공차를 보정하는 데 사용됩니다.
공작물 감지
피스톤 스크로크 모니터링
Gripping force maintenance
Pneumatic connections for the power supply
Round cells 46x
Multiple gripper unit
End-of-line
Cell spacing unit
공작물 감지
유도성 근접 스위치를 이용한 부품 유무 모니터링을 통한 공작물 감지.
피스톤 스크로크 모니터링
솔레노이드 스위치가 있는 피스톤 스트로크 모니터링 시스템을 통해 "마그네틱 활성화" 또는 "마그네틱 비활성화" 상태를 감지할 수 있습니다.
Gripping force maintenance
Gripping force maintenance in the event of a compressed air failure is provided by the principle of the permanent magnet. The magnetic holding force holds the battery cell securely, avoiding workpiece loss, and ensures maximum process reliability.
Pneumatic connections for the power supply
Optional main air connections on the side or direct bottom-sided air connections for space-saving integration of several individual grippers in one gripping system.
Round cells 46x
The magnetic gripper RCG 46 can securely handle all common formats of Ø 46 mm round cells.
Multiple gripper unit
The round cell gripper RCG can be set up as an individual multiple gripper unit in order to realize the specific cell spacing depending on the application. Whether one, two, ... or even several hundred individual grippers.
End-of-line
The possibility of individual control for each round cell gripper RCG means that individual battery cells can be ejected in the process sequence, e.g. in the end-of-line testing process.
Cell spacing unit
Cell spacing units also offer the option of changing the distance between several battery cells during the pick-&-place process. The number of cells to be gripped and the cell spacings are individually adapted to the application.
적용 예시
적용 예시
RCG 46 원형 셀 그리퍼를 사용하면 윤곽을 방해하지 않고 직경 Ø 46 mm의 배터리 셀의 핸들링이 가능합니다. 애플리케이션별 그립 유닛과 함께 배터리 모듈 및 팩 조립의 모든 공정 단계를 구현할 수 있습니다.
- 1
-
원형 셀 그리퍼(RCG)
- 2
-
용도별 그리핑 장치 포함 허용값 보정 유닛 및 셀 간격 단위
- 3
-
용도별 그리핑 유닛
- 4
-
선형 직접 축 SLD