TENDO EC CAT40 Ø3/4"x4"
Hydro-Dehnspannfutter
Ident.-Nr. 1000067
TENDO EC CAT40 Ø3/4"x4", Werkzeughalter
- Hydro-Dehnspannfutter
- Baureihe: TENDO E compact
- Werkzeughalterschnittstelle: CAT 40
- Spanndurchmesser: 3/4"
- Auskraglänge: 101.6 mm
- Rundlaufgenauigkeit: ≤ 0,005 mm bei 2,5 x D
- Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
- Min. Drehmoment: 520 Nm
Technische Details
| Series | TENDO E compact |
|---|---|
| D2 [mm] | 49.0 |
| Min. torque [Nm] | 520.0 |
| D6 [mm] | 38.0 |
| G | M8x1 |
| Technology | Hydraulic expansion toolholder |
| Toolholder interface | CAT 40 |
| Toolholder standard | ASME B5.50 |
| Clamping diameter D1 | 3/4" |
| Weight [kg] | 1.8 |
| L4 [mm] | 82.55 |
| L2 [mm] | 51.0 |
| L3 [mm] | 10.0 |
| Projecting length L1 [mm]/[inch] | 101,6 mm / 4.0" |
Version
TENDO E compact (E compact = excellent cost-performance ratio)
Run-out accuracy
≤ 0.005 mm at 2.5 x D
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Intermediate sleeves
Additional shank diameters can be clamped using intermediate sleeves
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ASME B5.50
Bores for form AF are sealed with set-screws as transport safety
Length-setting screw
With adjustment screw for axial length adjustment
Scope of delivery
Does not include an actuation key
Individual
Additional sizes and customized designs are available upon request