AGE-S-XYZ-100-0
IDnr. 324502
- Compensatie XY: ± 4 mm
- Compensatie Z: 10 mm
- Gewicht werkstuk: 9 kg
- Kracht Fz max.: 110 N
- Kracht Fd max.: 500 N
Technische gegevens
| Compensatie XY [mm] | ± 4 |
|---|---|
| Compensatie Z [mm] | 10.0 |
| Aanbevolen handlingsgewicht, verticaal [kg] | 9.0 |
| Aanbevolen handlingsgewicht, horizontaal [kg] | 5.5 |
| Vergrendelingskracht [N] | 800.0 |
| Zuigerkracht Z [N] | 800.0 |
| Max. veerkracht [N] | 240.0 |
| Min. werkdruk [bar] | 2.5 |
| Max. werkdruk [bar] | 8.0 |
| Nominale werkdruk [bar] | 6.0 |
| Rondloopnauwkeurigheid [mm] | 0.1 |
| Aansluiting aan robotzijde | ISO 9409-1-100-6-M8 |
| Aansluiting aan gereedschapszijde | ISO 9409-1-100-6-M8 |
| Gewicht [kg] | 3.6 |
| Min. omgevingstemperatuur [°C] | 5.0 |
| Max. omgevingstemperatuur [°C] | 60.0 |
| Lengte X [mm] | 142.0 |
| Breedte Y [mm] | 125.0 |
| Hoogte Z [mm] | 85.5 |
| Moment Mx max. [Nm] | 30.0 |
| Moment My max. [Nm] | 30.0 |
| Moment Mz max. [Nm] | 30.0 |
| Kracht Fz max. [N] | 110.0 |
| Max. kracht Fz [N] | 500.0 |
Afmetingen en maximaal toegelaten belasting
Afmetingen en maximaal toegelaten belasting
Dit is het max. totaal van alle momenten en belastingen (versnellingskrachten en -koppels, proceskrachten enz.) die kunnen inwerken op een compensatie-eenheid om zeker te zijn van een foutloze werking.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Guidance system
robust linear guidances
Monitoring
XY locking and unlocking via a magnetic switch and Z-stroke via inductive proximity switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months