arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
ROTA NCM

ROTA NCM

Hybrid chuck with automatic workpiece centering
3-jaw or 6-jaw hybrid chuck that combines the advantages of automatic (pneumatic or hydraulic) centering using three or six jaws and the deformation-free clamping of magnetic clamping technology for all ferromagnetic components.

Advantages – Your benefits

  • Automatic workpiece centering
    No manual alignment of the workpiece is necessary
  • Deformation-free magnetic workpiece clamping
    For maximum radial and axial run-out tolerances
  • High magnetic holding forces
    Depending on the workpiece geometry and material, a high cutting performance is possible
  • For internal and external centering
    For universal and flexible use
  • Optimal dirt sealing, encapsulated centering chuck
    Low maintenance and ensured high clamping accuracy
  • Rear rotary feeder for air and power
    Ideal for automatic mode
  • Standard interface for centering jaws
    Centering jaws can be manufactured from SCHUNK standard jaws
  • High clamping force due to jaw support
    Improved cutting performance, particularly during hard turning
  • For grinding and hard turning
    Ideal for high-precision workpiece machining
  • For horizontal and vertical machines
    Suitable for use with almost every machine tool (turning – milling – grinding)
  • Constant centering and clamping forces
    Process reliable machining
  • 3-sided machining possible due to retractable jaws
    Reduced set-up costs, shorter processing times

Options and special information

  • Hybrid chuck with force-actuated workpiece centering
    If you are using a hybrid chuck ROTA NCM from SCHUNK, the user benefits from the synergy of a centering chuck and magnetic clamping technology. The result: ROTA NCM reduces set-up times for pneumatically actuated grinding machines and lathes by up to 80%, thereby providing a clearly perceptible productivity boost. Machining can take place from as many as three sides, completely free of vibration and deformation.