OPR-061-P05
ID 321362
- 旋转位移: ± 20 °
- 力 Fd 最大: 880 N
- 弹簧触发力: 48 N
技术细节
| 轴向位移 [mm] | 5.6 |
|---|---|
| 角度偏转 [°] | ± 11 |
| 旋转位移 [°] | ± 20 |
| 最小触发力矩， 角度 Mx, My [Nm] | 8.6 |
| 最小触发力矩，旋转 Mz [Nm] | 8.5 |
| 最小触发力，轴向 Fd [N] | 241.0 |
| 最大力 Fd [N] | 880.0 |
| 弹簧触发力 [N] | 48.0 |
| 弹簧释放扭矩，角度 [Nm] | 1.8 |
| 弹簧释放扭矩，旋转 [Nm] | 1.7 |
| 最小电源电压 [V] | 10.0 |
| 最大电源电压 [V] | 30.0 |
| 重复精度 [mm] | ± 0.025 |
| 响应灵敏度 [mm] | 0.5 |
| 重复精度，旋转 [min] | 5.0 |
| 最小工作压力 [bar] | 1.4 |
| 最大工作压力 [bar] | 5.9 |
| 重量 [kg] | 0.33 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 60.0 |
| 直径 D [mm] | 60.0 |
| 高度 Z [mm] | 45.1 |
| 力矩 Mx max. [Nm] | 28.0 |
| 力矩 My max. [Nm] | 28.0 |
| 力矩 Mz max. [Nm] | 24.4 |
Dimensions and maximum loads
触发力矩 Mx、My、Mz
触发力 Fd
力矩负载
Dimensions and maximum loads
The design of a collision sensor is defined by the occuring forces and moments in your application.
触发力矩 Mx、My、Mz
- X 轴:
- 压力
- Y 轴:
- 力矩
触发力 Fd
- X 轴:
- 压力
- Y 轴:
- 力
力矩负载
图表显示了最大允许工作压力下取决于力矩 Mx,y 的 OPR 角偏转。
- X 轴:
- 角度以度数为单位
- Y 轴:
- Mx, y，以 Nm 为单位
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
integrated cylinder pistons
Scope of delivery
Collision and overload sensor in the ordered variant, elements for electrical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months