SLD 24-H-H
- Carrera máx.: 5070 mm
- Fuerza de accionamiento máx.: 2400 N
Technical details
| Concepto de accionamiento | Accionamiento directo lineal |
|---|---|
| Carrera útil máx. H [mm] | 5070.0 |
| Fuerza de accionamiento máx. [N] | 2400.0 |
| Fuerza nominal [N] | 688.0 |
| Precisión de repetición [mm] | 0.01 |
| Velocidad máx. [m/s] | 10.0 |
| Aceleración máx. [m/s²] | 100.0 |
| Corriente máx. [A] | 113.0 |
| Corriente de parada máx. (corriente nominal) [A] | 29.4 |
| Temperatura ambiente mín. [°C] | 5.0 |
| Temperatura ambiente máx. [°C] | 40.0 |
| Peso de la corredera y del motor [kg] | 23.0 |
| Peso de las placas finales [kg] | 3.2 |
| Peso adicional por carrera de 100 mm [kg] | 3.6 |
| Longitud X [mm] | 680.0 |
| Anchura Y [mm] | 300.0 |
| Altura Z [mm] | 132.0 |
| Fuerza Fy dinámica [N] | 192600.0 |
| Fuerza Fz dinámica [N] | 192600.0 |
| Momento Mx dinámico [Nm] | 17334.0 |
| Momento My dinámico [Nm] | 28183.0 |
| Momento Mz dinámico [Nm] | 28183.0 |
| Momento de inercia geométrico ly [mm⁴] | 2905000.0 |
| Momento de inercia geométrico lz [mm⁴] | 5.5779E7 |
| Fricción [N] | 75.0 |
| Normativa para sala blanca ISO 14644-1 | 4 |
| Categoría de sala blanca: ISO 14644-1 | 2015 |
| Variante de alta velocidad | sí |
Dimensiones y cargas máximas
Dimensiones y cargas máximas
Las fuerzas y los pares indicados son valores estáticos que se aplican a cada mordaza básica y pueden darse simultáneamente.
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
How to get to the online configurator
The configurator is either linked on the SCHUNK website via the appropriate linear unit or can https://schunk.com/de/de/konfigurator-linearmodule called up directly.
Guidance
Rail guide
Drive
Linear direct drive based on a 3-phase, electronically commutated and permanently excited AC synchronous liner motor
Stroke measuring system
Non-contact measuring system with absolute and incremental versions; available with 1Vss, HIPERFACE®, HIPERFACE DSL®, DRIVE-CLiQ and EnDat 2.2 interfaces. Other interfaces are available on request.
Profile
Aluminum extruded profile with profiled rail guide
Slide
Aluminum slide, primary part and measuring system reading head directly integrated
Scope of delivery
Accessory kit with centering sleeves, safety information (product-specific instructions are available online)
Drive controller
Consultation on parameter settings for drive controllers from BOSCH (IndraDrive, IndraDrive CS) and Siemens (Sinamics S120). Provision of motor data sheets for other drive controllers. Commissioning support on request.
Warranty
24 months