B 110-ARS-50AT10-E-300
- Corsa max.: 7440 mm
- Versione azionamento: 50 AT 10-E
- Forza motrice max.: 2000 N
Technische gegevens
| Corsa max. H [mm] | 7440.0 |
|---|---|
| Forza motrice max. [N] | 2000.0 |
| Precisione di ripetibilità [mm] | ± 0.08 |
| Lunghezza totale max. [mm] | 8100.0 |
| Velocità max. [m/s] | 8.0 |
| Accelerazione max. [m/s²] | 60.0 |
| Temperatura ambiente min. [°C] | 0.0 |
| Temperatura ambiente max. [°C] | 80.0 |
| Peso morto di base con slitta inclusa [kg] | 27.0 |
| Massa aggiuntiva per 100 mm di corsa [kg] | 1.2 |
| Peso dell'azionamento slitta [kg] | 15.0 |
| Sistema di guide | Guida a rulli |
| Diametro rulli [mm] | 28.0 |
| Sistema di azionamento | trasmissione a cinghia |
| Coppia a vuoto [Nm] | 3.5 |
| Momento di inerzia [kgm²] | 0.035 |
| Tipo di cinghia dentata | 50 AT 10-E |
| Corsa di traslazione per ogni rotazione [mm] | 300.0 |
| Passo del mandrino [mm] | 20 |
| Lunghezza X [mm] | 660.0 |
| Larghezza Y [mm] | 110.0 |
| Altezza Z [mm] | 220.0 |
| Coppia Mx max [Nm] | 300.0 |
| Coppia My max. [Nm] | 600.0 |
| Coppia Mz max [Nm] | 450.0 |
| Forza Fy max [N] | 2000.0 |
| Forza Fz max [N] | 5000.0 |
| Forza Fz max [N] | 2500.0 |
| slitta a trasmissione | Sì |
I supporti per mandrino standard SCHUNK con smorzamento del rumore (SAG) riducono la corsa massima di 10 mm per ogni 2 SAG.
Tenere presente che il momento di inerzia della massa per gli assi del mandrino si riferisce a un metro.
Dimensions and maximum loads
Max. Antriebskraft (Zahnriemen)*
Dimensions and maximum loads
The indicated forces and moments are maximum values for individual loading. If several forces and/or moments are applied at the same time, the maximum permitted individual values will be lower.
Max. Antriebskraft (Zahnriemen)*
- X-as:
- Geschwindigkeit
- Y-as:
- Antriebskraft
General notes about the series
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Max. stroke
is the maximum permissible stroke. Acceleration and braking distances or possible overrun must be taken into consideration.
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Acceleration and speed
The values specified are the maximum values of the units without loading. The actual accelerations and speeds for your application must be designed separately and can deviate from the maximum values.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Operating principle
Choice of toothed belt or ball screw spindle drive
Drive
servomotors of different providers can be trouble-free adapted
Profile
Extruded aluminum profile with plastic cover strip
Slide
Aluminum slide with a brush seal
Scope of delivery
Assembly and operating manual with declaration of incorporation
Warranty
24 months