B 110-ARS-50AT10-E-300
Universele lineaire module
Universal linear module Beta, Size: 110, electrical, Belt drive, Roller guide, driven slide
- Max. stroke: 7440 mm
- Drive version: 50 AT 10-E
- Max. driving force: 2000 N
Technische gegevens
| Max. stroke H [mm] | 7440.0 |
|---|---|
| Max. driving force [N] | 2000.0 |
| Repeat accuracy [mm] | ± 0.08 |
| Max. total length [mm] | 8100.0 |
| Max. speed [m/s] | 8.0 |
| Max. acceleration [m/s²] | 60.0 |
| Min. ambient temperature [°C] | 0.0 |
| Max. ambient temperature [°C] | 80.0 |
| Dead weight of base including slide [kg] | 27.0 |
| Additional mass per 100 mm stroke [kg] | 1.2 |
| Weight of slide drive [kg] | 15.0 |
| Guidance system | Roller guide |
| Roll diameter [mm] | 28.0 |
| Drive concept | Belt drive |
| Idle torque [Nm] | 3.5 |
| Moment of inertia [kgm²] | 0.035 |
| Toothed belt type | 50 AT 10-E |
| Traverse path per revolution [mm] | 300.0 |
| Spindle pitch [mm] | 20 |
| Length X [mm] | 660.0 |
| Width Y [mm] | 110.0 |
| Height Z [mm] | 220.0 |
| Moment Mx max. [Nm] | 300.0 |
| Moment My max. [Nm] | 600.0 |
| Moment Mz max. [Nm] | 450.0 |
| Force Fy max. [N] | 2000.0 |
| Force Fz max. [N] | 5000.0 |
| Force -Fz max. [N] | 2500.0 |
| driven slide | yes |
Please note that the long slide plates and the use of spindle supports (SA) reduce the maximum stroke H.
SCHUNK standard spindle supports with noise damping (SAG) reduce the maximum stroke by 10 mm for every 2 SAG.
Please note that the moment of inertia for spindle axes refers to one meter.
SCHUNK standard spindle supports with noise damping (SAG) reduce the maximum stroke by 10 mm for every 2 SAG.
Please note that the moment of inertia for spindle axes refers to one meter.
Dimensions and maximum loads
Max. driving force (toothed belt)*
Dimensions and maximum loads
The indicated forces and moments are maximum values for individual loading. If several forces and/or moments are applied at the same time, the maximum permitted individual values will be lower.
Max. driving force (toothed belt)*
- X-as:
- Speed
- Y-as:
- Driving force
*The specified driving forces are maximum values for modules with toothed-belt drives at a given speed.
产品系列的常规说明
环境条件
模块主要在清洁的环境条件下使用。请注意：如果模块用于恶劣环境条件下，则可能会缩短其使用寿命，而 SCHUNK 不承担此类责任。详细信息，请咨询我们。
最大行程
即为最大允许行程的条件下实现灵活的电缆安装。必须考虑到加速度和制动距离或可能的越限。
重复精度
定义为恒定状态下 100 个连续定位循环后目标位置的分布。
加速和速度
规定数值为无荷载时装置的最大值。您应用的实际加速和速度必须分别设计且可与最大值存在偏差。
设计或控制算法
有必要验证选定装置的尺寸，否则将导致超载。如需帮助，请联系我们。
工作原理
选择齿带或滚珠丝杆主轴传动装置
传动装置
可以无故障地调整适配不同供应商的伺服电机。
个人信息
挤压铝型材，带塑料压缝板
滑块
铝滑块，带毛刷密封垫
标配范围
装配和操作说明书，带制造商声明
保修期
24 个月