KSP3 100-AS-PM-BWA
Pneumatische klemkrachtblokken met klemsnelwisselsysteem
IDnr. 1479155
Pneumatische opspankrachtblok in standaardversie
Productkenmerken
Productkenmerken
- Klemkrachtblok met 2 klauwen
- Centrisch klemmen
- Standaard slag
- Klemkrachtversterking/externe borging
- Pneumatische afvraging eindpositie
- Pneumatische contactdetectie
- Basisklemmen: Snel wisselen van klauwen
- Afmetingen: 100 x 100 x 88 mm
- Klemkracht bij max. bedrijfsdruk: 18 kN
- Extra klemkracht dankzij de veermontage: 2.5 - 6.5 kN
- Slag per klem: 2 mm
- Max. klemhoogte: 27 mm
- Rondloopnauwkeurigheid: 0.01 mm
- Werkdruk: 3 - 9 bar
- Luchtverbruik per dubbele slag bij 6 bar: 1000 cm³
- Sluit-/openingstijd: 0.2 s
- Gewicht: 4 kg
Technische gegevens
| Stroke per jaw [mm] | 2.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 18.0 |
| Min. additional clamping force resulting from spring assembly [kN] | 2.5 |
| Max. additional clamping force resulting from spring assembly [kN] | 6.5 |
| Min. operating pressure [bar] | 3.0 |
| Max. operating pressure [bar] | 9.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 27.0 |
| Distance H [mm] | 14.5 |
| Air consumption per double stroke at 6 bar [cm³] | 1000.0 |
| Closing/opening time [s] | 0.2 |
| Weight [kg] | 4.0 |
Scope of delivery
Clamping force block, mounting screws, cover plugs, clamping sleeves, fitting screws, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)