SFA-SM 400
Mors à segment en acier
ID 173104
SFA-SM 400, Mors à segment en acier
Caractéristiques des produits :
Caractéristiques des produits :
- Denture: Tenon-rainure
- Largeur de rainure: 18 mm
- Largeur d'appui: 30 mm
- Unité de livraison: 1 lot= 3 pièces
- Découvrez d'autres mors à segment, disponibles en aluminium ou en acier. Cliquez sur « Outils » et utilisez notre outil de recherche rapide de mors de serrage.
- Souhaitez-vous personnaliser la quantité de livraison (deux, trois, quatre, six pièces) ? Cliquez sur « Configurer des mors de serrage individuels ».
Technické údaje
| Product group | Full grip jaws made of steel |
|---|---|
| Serration | Tongue and groove |
| Slot width N [mm] | 18.0 |
| Tab width S [mm] | 30.0 |
| Width B [mm] | 330.0 |
| Width B1 [mm] | 45.0 |
| Height H [mm] | 85.0 |
| Height H1 [mm] | 78.0 |
| Height H2 [mm] | 55.0 |
| Length L [mm] | 160.0 |
| Hole spacing a [mm] | 81.0 |
| Hole spacing b [mm] | 60.0 |
| Screws | M16 |
| Material | Steel 16MnCr5 suitable for case hardening |
| m/set [kg] | 55.17 |
If used together with SCHUNK EWB-MT 400 base jaws
In combination with Base Jaws SFG 630-400
In combination with Base Jaws SFG 630-400