arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO BT-DC 40 Ø20x90 Illustration similar

CELSIO BT-DC 40 Ø20x90

Portaherramientas térmico

ID 1428565

CELSIO BT-DC 40 Ø20x90, Portaherramientas
  • Portaherramientas térmico
  • Serie: CELSIO
  • Variante Dual Contact
  • Interfaz del portaherramientas: BT-DC 40
  • Diámetro de sujeción: 20 mm
  • Longitud de proyección: 90 mm
  • Concentricidad: ≤ 0,003 mm medida en el orificio de sujeción (de acuerdo con DIN 69882-8).
  • Calidad de equilibrado: G2.5 a 25.000 rpm o Umáx. < 1 gmm
  • Par de apriete mín.: 450 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface BT-DC 40
Clamping diameter D1 20 mm
D2 [mm] 42.0
D6 [mm] 33.0
Projecting length L1 [mm]/[inch] 90 mm / 3.5"
L2 [mm] 53.0
L3 [mm] 10.0
L4 [mm] 63.0
G M16x1
Min. torque [Nm] 450.0
Weight [kg] 1.5
Dual Contact variant yes
Coolant-proof yes
Standard length yes

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore for data carrier as an option

Toolholder changes
For automatic toolholder changes

Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport

Face contact
Similar to DIN ISO 7388-2 JD/JF however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces

Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)

Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)

Individual
Additional sizes and customized designs are available upon request