ER20 HSK-F63x75
ER collet chucks
ID 1357892
ER20 HSK-F63x75, Toolholders
- ER collet chucks
- Series: ER collet chucks
- Toolholder interface: HSK-F 63
- Projecting length: 75 mm
- Run-out accuracy: ≤ 0.008 mm at 2.5 x D
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Technical details
| Technology | ER collet chucks |
|---|---|
| Series | ER collet chucks |
| Toolholder interface | HSK-F 63 |
| Toolholder standard | DIN 69893-6 |
| ER clamping size | ER 20 |
| Min. clamping diameter D1 [mm] | 1.0 |
| Max. clamping diameter D1 [mm] | 13.0 |
| D2 [mm] | 34.0 |
| D3 [mm] | 34.0 |
| Projecting length L1 [mm]/[inch] | 75 mm / 3.0" |
| Projecting length L1 [mm] | 75.0 |
| L4 [mm] | 19.0 |
| L5 [mm] | 49.0 |
| Weight [kg] | 0.865 |
| Coolant-proof | yes |
| Standard length | yes |
Uitloopnauwkeurigheid
≤ 0,008 mm bij 2,5 x D
Balanceergraad
G2.5 bij 25.000 tpm of Umax < 1 gmm
Gegevensdragers
Boorgaten voor gegevensdragers volgens DIN 69873
Wissel van gereedschapshouders
Voor automatische wissel van gereedschapshouders
Lengte-instelschroef
Zonder afstelschroef voor de afstelling van de axiale lengte
Levering
Inclusief klemmoer
Individueel
Andere afmetingen en uitvoeringen op maat zijn op verzoek verkrijgbaar