SRU 10.2-S
ID 356930
Alternative products:
- Coppia: 0.28 Nm
Technical details
| Angolo di rotazione [°] | 180 |
|---|---|
| Possibilità di regolazione delle posizioni finali [°] | 90 |
| Smorzamento nella posizione finale | Elastomero smorzante |
| Coppia [Nm] | 0.28 |
| Numero delle posizioni centrali | Nessuno |
| Classe di protezione IP | 65 |
| Peso [kg] | 0.2 |
| Consumo fluidi (2x angolo nom.) [cm³] | 4.27 |
| Pressione d'esercizio nominale [bar] | 6.0 |
| Pressione d'esercizio min. [bar] | 3.0 |
| Pressione di esercizio max. [bar] | 8.0 |
| Diametro tubo flessibile di collegamento | 3 x 1.8 x 0.6 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 60.0 |
| Precisione di ripetibilità [°] | 0.07 |
| Lunghezza X [mm] | 137.0 |
| Larghezza Y [mm] | 31.0 |
| Altezza Z [mm] | 25.0 |
| Coppia My max. [Nm] | 2.5 |
| Forza assiale max. Fz max. [N] | 255.0 |
| Variante Speed | Sì |
Dimensioni e carichi massimi
Inerzia della massa max. consentita J*
Inerzia della massa max. consentita J*
Dimensioni e carichi massimi
Le coppie e le forze indicate sono valori statici validi e possono subentrare contemporaneamente. Lo strozzamento deve essere effettuato per garantire che il movimento rotatorio avvenga senza urti o rimbalzi. Altrimenti si riduce la durata del prodotto.
Inerzia della massa max. consentita J*
- X-axis:
- Tempo di rotazione
- Y-axis:
- Momento di inerzia della massa
- X-axis top:
- Cicli all'ora
Inerzia della massa max. consentita J*
- X-axis:
- Tempo di rotazione
- Y-axis:
- Momento di inerzia della massa
- X-axis top:
- Cicli all'ora
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Pinion position
is always shown in the left end position. The pinion rotates from here to the right in clockwise direction. The arrow makes the direction of rotation clear.
Pinion screw connection diagram
When setting a swivel angle smaller than 90°, the left end stop must be completely turned in. This means that the left end position has a screw connection diagram on the pinion which is clockwise turned by 90° compared to the main view, which shows a swivel angle of 180°.
Customized angle of rotation
More swivel angles are available on request.
Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.
Travel to the pneumatic middle position
is carried out using only half of the nominal torque.
Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.
Housing material
Aluminum (extruded profile)
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Double piston rack and pinion principle
Scope of delivery
Flow control coupling, centering bushings, O-rings for direct connection, assembly and operating manual with declaration of incorporation
Warranty
24 months
Service life characteristics
on request