RotoRi
Jaw turning fixture
Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Description
Výhody – Přínos pro Vás
- Zvyšuje flexibilitu
Upnutí za vnitřní a za vnější průměr pomocí kroužku - Široká oblast použití
Vhodné po sklíčidla o velikosti 80 – 1 600 mm, pro 2, 3, 4 a 6čelisťová sklíčidla - Vynikající přesnost
seřízení obráběcího průměru s přesností 0,1 mm - zvyšuje ekonomickou efektivitu
Nižší náklady na nastavení díky upínacím čepům RotoFix a také úspora nákladů na upínací čelisti - Rychlá a pružná manipulace
Optimální přístupnost k obráběcímu nástroji